Polycom realpresence group series

Introducing the Polycom RealPresence Group Series Systems
Polycom, Inc. 28
Polycom Touch Control Indicator Light
When the Polycom Touch Control is on, the Home button is lit.
Polycom EagleEye Acoustic Camera Indicator Lights
The following figure shows the location of the LED on the front of the EagleEye Acoustic camera.
EagleEye Acoustic indicator lights
The system status light provides the following information.
Blinking amber light In a POST sequence, at least one test has resulted in a warning error. The
system continues to blink amber but initializes after the sequence is
complete if no severe errors occur.
Blinking red light In a POST sequence, at least one test has resulted in a severe error. The
system continues to blink red and will not start up.
Steady blue light System is initializing.
System is awake.
Blinking blue light System received an IR (infrared) signal.
System is receiving a call.
Steady amber light System is asleep.
Alternating blue and amber lights System is in software update mode.
System is in factory restore mode.
Fast blinking amber light System is shutting down.
Steady green light System is in a call.
Ref.
Number
Description
1 IR Sensor
2 System Status
Indicator Light System Status