Polycom, Inc. 87
Microphones and Speakers
To receive and send audio, you must connect and configure both microphones and speakers. This section
contains placement information for various audio inputs and speakers. It also covers audio settings
available from the web interface.
● Available Microphone Inputs by System
● Audio Input Tips by Microphone Type
● Audio Input Configuration Options
● Audio Output
● Configure Audio Settings
● Audio Meters
● Test StereoSurround
For specific details regarding how to connect audio inputs and speakers, refer to the appropriate
RealPresence Group system setup sheet and System Back Panel Views. For information about required
cables, refer to the Polycom RealPresence Group Series Integrator Reference Guide.
Available Microphone Inputs by System
The number of audio inputs varies based on the RealPresence Group system you are using.
As shown in the following figures, the RealPresence Group 300, RealPresence Group 310, and
RealPresence Group 500 systems have one microphone input, while the RealPresence Group 700 system
has two. You can freely configure the way you connect devices to a system, as long as you do not exceed
the limits mentioned in the following sections. If you are using the RealPresence Group 700 system, you
can connect devices to either or both inputs as long as you stay within the guidelines for the total number
of devices allowed for the system.
RealPresence Group 300, 310, and 500 microphone inputs
.
RealPresence Group 700 microphone inputs
To Next Page
Loading...
Need help?
General
