Polycom realpresence trio visual+

Polycom, Inc. 75
Connecting Devices to the RealPresence
Trio 8800
You can connect a laptop or mobile devices to the RealPresence Trio 8800 using a USB cable, Bluetooth,
or Near Field Communication (NFC). When you connect a device to the system, you can play audio from
audio calls, video calls, music players, or videos on the system. See the following section for information on
connecting a device to the RealPresence Trio 8800:
● Make the RealPresence Trio 8800 Visible to Nearby Bluetooth Devices
● Connect a Bluetooth Device
● Connect a Bluetooth Device Using Near Field Communication
● Play Audio from a Bluetooth Device
● Connecting a Device using a USB Cable
● Connecting a Laptop to RealPresence Trio 8800
● Setting RealPresence Trio 8800 as Your Audio Device
Make the RealPresence Trio 8800 Visible to Nearby
Bluetooth Devices
Before you connect a Bluetooth or NFC device to the system, make sure the system is visible to nearby
devices.
To make the system visible to nearby devices:
1 On the Home screen, tap Bluetooth.
2 Make sure the statement Visible to all nearby Bluetooth device is displayed below the system’s
name, as shown next.