Power Electronics SD300 Series User Manual

SD300
POWER ELECTRONICS
150
DESCRIPTION OF PROGRAMMING PARAMETERS
Screen
Description
Default
value
Range
Function
Set on
RUN
Cn.55
[19]
Forward
negative
torque limit
180.0%
0.0 to
200.0%
The user can set the forward regeneration
operation torque limit whenever the torque
limit reference has been set as LOCAL
YES
Cn.56
[19]
Reverse
positive torque
limit
180.0%
0.0 to
200.0%
The user can set the reverse motoring
operation torque limit whenever the torque
limit reference has been set as LOCAL
YES
Cn.57
[19]
Reverse
negative
torque limit
180.0%
0.0 to
200.0%
The user can set the reverse regeneration
operation torque limit whenever the torque
limit reference has been set as LOCAL
YES
Cn.62
[19]
Speed limit
reference
LOCAL
0 to 8
Select the source to introduce the speed
limit reference.
OPT.
DESCR.
FUNCTION
0
LOCAL
Reference will be given by
keypad and will be set in
dr.1.
2
V1
Reference will be
introduced through the
voltage analog input 1.
4
V2
Reference will be
introduced through the
voltage analog input 2.
5
I2
Reference will be
introduced through the
current analog input 2.
6
MOD
BUS
The reference will be
introduced through
Modbus.
7
COMM
S
The reference will be
introduced through the
communications.
8
PLC
The common area can be
linked with user sequence
output and can be used as
command.
NO
Cn.63
[19]
Forward
speed limit
60.00Hz
0.00 to
400.00H
z
The user can set the forward speed limit
whenever the speed limit reference has
been set as LOCAL.
YES
Cn.64
[19]
Reverse
speed limit
60.00Hz
0.00 to
400.00H
z
The user can set the reverse speed limit
whenever the speed limit reference has
been set as LOCAL.
YES

Power Electronics SD300 Series Specifications

General

Brand	Power Electronics
Model	SD300 Series
Category	Inverter
Language	English