Power One AURORA - Page 66

Installation and Operation Manual Page 66 of 104
(PVI-3.8/4.6-I-OUTD-US Rev.: 1.1)
Message Error
Warning
Error
Type
Description
Grid Fail W003 // Grid Fail
Int.Error // E010 Bulk Low
Int.Error // E011 Ramp Fail
DC/DC Fail // E012 DcDc Error revealed by inverter
Wrong Mode // E013 Wrong Input setting (Single instead of dual) or
wrong grounding mode
Over Temp. // E014 Overtemperature
Cap. Fault // E015 Bulk Capacitor Fail
Inv. Fail // E016 Inverter fail revealed by DcDc
Int.Error // E017 Start Timeout
Ground F. // E018 I leak fail
Int.Error // E019 Ileak Sensor fail
Int.Error // E020 DcDc relay fail
Int.Error // E021 Inverter relay fail
Int.Error // E022 Autotest Timeout
Int.Error // E023 Dc-Injection Error
Grid OV W004 // Output Overvoltage
Grid UV W005 // Output Undervoltage
Grid OF W006 // Output Overfrequency
Grid UF W007 // Output Underfrequency
Z Grid HI W008 // Z grid out of range
Int.Error // E024 Unknown Error –
--------- // E025 Riso Low (Log Only)
Int.Error // E026 Vref Error
Int.Error // E027 Vgrid Measures Fault
Int.Error // E028 Fgrid Measures Fault
Int.Error // E029 Zgrid Measures Fault