Installation and Operation Manual Page 75 of 104
(PVI-3.8/4.6-I-OUTD-US Rev.: 1.1)
5.4.5.2 Partial
Select Partial to view the following information:
Time: Total operation time since the counter was last reset *
E-par: Total energy produced since the counter was last reset *
PPeak: Maximum peak power measured since the 'partial' counter was activated
Val. : Economic gain since the counter was last reset*
CO2: CO
2
saving compared to fossil fuels since counter was last reset *
* Hold the ENTER key (4
th
key from display) depressed for over 3 seconds to reset all
counters in this submenu. After this time, a warning sound is repeated 3 times.
5.4.5.3 Today
Select Today to view the following information:
E-tod: Total energy produced during the day
Ppeak: Peak power value achieved during the day
Val. : Economic gain during the day
CO2: CO
2
saving for the day compared to fossil fuels
E-tod KWh
Ppeak W
Val. EUR
CO2 kg
Time h
E-par KWh
Ppeak W
Val. EUR
CO2 kg
To Next Page
Loading...
