Installation and Operation Manual Page 86 of 104
(PVI-3.8/4.6-I-OUTD-US Rev.: 1.1)
5.4.7 Info
This menu is used to display all Aurora data, the grid standard and chosen language by
means of the special selectors.
Part No. (part number)
Serial No. – Wk – Yr (serial number, week, year)
Fw rel (firmware revision level)
Country Selector
The last menu allows user to display what standard is currently set in the inverter
(Current Value), what standards will be applied when it is next switched on (New
Value) after acting on the selectors, set the new value (Set Value), and check the time
remaining for changes made to the applied standard (Residual Time).
To Next Page
Loading...
