Installation and Operation Manual Page 85 of 104
(PVI-3.8/4.6-I-OUTD-US Rev.: 1.1)
Select COMPOSE MESSAGE and you will be able to write the first line of the
message.
The maximum number of characters that can be used is 16. Press the Enter key 17
times and go to the second line.
To write the message always use the display keys in the following way:
Use ENTER (4
th
key) to move from one figure to the next (from left to right)
Use ESC (1
st
key) to go back to the previous position (from right to left)
Press ESC repeatedly to go back to the previous menus as described in
section 5.5.3
Use UP (2
nd
key) to scroll upwards through the numbers, letters and symbols
Use DOWN (3
rd
key) to scroll downwards through the numbers, letters and
symbols
Message row 2:
To Next Page
Loading...
