Printronix S828 - Page 122

ProgrammerManual PTX‐S828
Chapter5IPDSProgrammingInformation 120 260071‐001A
Decimal Hex Description
67-78 43-4E Graphics Function Set Vector
79-84 4F-54 Page Segment Function Set Vector
85-92 55-5C Overlay Function Set Vector
93-98 5D-62 Loaded Font Function Set Vector
99-110 63-6E Bar Code Function Set Vector
Note: The format for byte 8, the printer model number, is “03 - Ethernet Host Interface”
The function set vectors contain information relating to each specific command function set. The format of
each function set vector group follows:
Device Control Function Set Vector
Decimal Hex Value Description
11-12 B-C 001E
13-14 D-E C4C3 Device Control Function Set Identifier
15-16 F-10 FF10 DC/1 Level Identifier
17-18 11-12 8010 XOA, Activate Printer Alarm
19-20 13-14 80F2 XOA, Discard Buffered Data
21-22 15-16 80F4 XOA, Request Resource List
23-24 17-18 80F6 XOA, Exception Handling
25-26 19-1A 80F8 XOA, Print Quality Control
27-28 1B-1C 9005 XOH, Erase Print Data
29-30 1D-1E 9007 XOH, Erase Font Data
31-32 1F-20 900D XOH, Stack Received Pages
33-34 21-22 9015 XOH, Select Input Media Source
35-36 23-24 9017 XOH, Set Media Size
37-38 25-26 F001 XOH, DSC Mode Persistent NACK Handling Supported
39-40 27-28 FF02 Three Byte Sense Data Supported
Text Function Set Vector
Decimal Hex Value Description
41-42 29-2A 000E Vector Length
43-44 2B-2C D7E3 Composed Text Function Set Identifier
45-46 2D-2E FF20 PT/2 Level Identifier
47-48 2F-30 1001 Unordered Text Supported
49-50 31-32 4020 Limited Simulated Color Supported (see note 3)
(see note 1)
4000
(see note 2)
51-52 33-34 5041 Text Orientation (2 for NLS)
53-54 35-36 1000 Optimum Performance if Text Data in Ordered Page