Printronix S828 - Figure 152. Bar Code Examples with NATIVE Commands Example (Bar Code Mode Native)

ProgrammerManual PTX‐S828
AppendixIConfigurationMenuLockout 402 260071‐001A
Bar Codes handled in NATIVE Commands
(Native Bar Code Mode)
The S828 integrates in the firmware the handling of the Bar Codes with the NATIVE commands.
The complete and detailed information for these commands can be found on chapter 2 of this Programmer
Manual. Here are reported some examples how these commands work.
Figure 152. Bar Code Examples with NATIVE Commands Example (Bar Code Mode Native)