Printronix S828 - Bar Code Function Set Commands

ProgrammerManual PTX‐S828
Chapter5IPDSProgrammingInformation 196 260071‐001A
Table 8. Related Drawing Order (continued)
Line Line at Current Position
Relative Line
Relative Line at Current Position
Set Line Type
Set Line Width
Set Fractional Line Width
Set Color
Set Extended Color
Marker Marker at Current Position
Set Marker Symbol
Set Color, Set Extended Color
Character String Character String at Current Position
Set Character Direction
Set Character Angle
Set Character Cell Size
Set Color, Set Extended Color
Fillet Fillet at Current Position
Set Color, Set Extended Color
Set Line Type
Set Line Width
Set Fractional Line Width
Full Arc Full Arc at Current Position
Set Arc Parameters
Set Color, Set Extended Color
Set Line Type
Set Line Width
Set Fractional Line Width
Begin Image Begin Image at Current Position
Set Color, Set Extended Color
Image Data
End Image
Set Current Position
Relative Line Line
Relative Line at Current Position
Line at Current Position
Set Line Type
Set Line Width
Set Fractional Line Width
Set Current Position
Set Color, Set Extended Color
Bar Code Function Set Commands
The bar code function set contains the commands and controls for presenting bar code information on a
logical page, a page segment, or an overlay area on the physical medium. The following commands are
the bar code function set:
Command Code Description
WBCC D680 Write Bar Code Control
WBC D681 Write Bar Code
END D65D End
The following pages describe the bar code function set commands.