Printronix S828 - Bar Codes

ProgrammerManual PTX‐S828
Chapter2NativeEmulationCommands 60 260071‐001A
Bar Codes
DC4 DC4 ESC !
Bar Code Selection.
ASCII Code DC4 DC4 ESC ! htfFroqbsBSiEM
Hexadecimal Value X'14' X'14' X'1B' X'21' ! htfFroqbsBSiEM
Decimal Value 20 20 27 33 ! htfFroqbsBSiEM
This command is recognized only if the menu option “BAR CODE” is set to “NATIVE” mode.
h = Bar Code Height at n/6”, 1 < h < 30
t = Standard Bar Code to use
t Name
1 8-digits European Article Numbering EAN-8
2 13-digits European Article Numbering EAN-13
3 Universal Product Code Type A UPC-A
4 Universal Product Code Type E UPC-E
5 UPC/EAN 2 Digit Supplement UPC-EAN 2
6 UPC/EAN 5 Digit Supplement UPC-EAN 5
7, 8, 9 8-digits European Article Numbering EAN-8
10 General Purpose Bar Code Code-GP
11 Code 2 of 5 3-BAR (Data Logic) C25-3BAR
12 Binary Coded Decimal CODE BCD
13 MSI-Plessey MSI
14 AIM-USD-8 / Code-11 Code 11
15 AIM-USD-7 / Code-93 Code 93
16 Code 2 of 5 Bidirectional C25-BID
17 Code 2 of 5 Interleaved C25-INT
18 Code 2 of 5 Industrial C25-IND
19 Code 2 of 5 Matrix C25-MTX
20 Code 3 of 9 Code-39
21 8-digits European Article Numbering EAN-8
22 Codabar (all types) CODABAR
23 Code 128 CODE-128
24 USPS-PostNet POSTNET
f = Readable character printing
f = 1 printing enabled
f = 0 printing disabled
F = Font selection for the printable characters
F Selection
0 Selected font by r value
1 Default font for text
1 Special font for OCR-A o OCR-B bar codes according to the t value
3 Special font for OCR-A bar codes
4 Special font for OCR-B bar codes
r = Bar code rotation
r Selection
0 No rotation