Printronix S828 - Character Pitch and Print Modes

ProgrammerManual PTX‐S828
Chapter3ANSIEmulationCommands 74 260071‐001A
Character Pitch and Print Modes
ESC [ p1; ... pn m
Select graphics rendition (SGR).
ASCII Code ESC [ p1; ... pn m
Hexadecimal Value X'1B' X'5B' p1 X'3B' ... pn X'6D'
Decimal Value 27 91 p1 59 ... pn 109
This command selects fonts, pitch, print modes, and character styles according to the parameter settings:
p DEFINITION p DEFINITION
0 Normal Print Mode
1 Bold Print Mode
2 Subscript Mode
3 Superscript Mode
4 Underline Mode
5 Expanded Mode
6 Proportional
7 Italic Mode
8, 9 Reserved
10 Draft Font
11 Draft Font
12 LQ Gothic
13 Draft Font
14 LQ Courier
15 Draft Italic
16 LQ Gothic Italic
17 Draft Italic
18 LQ Courier Italic
19 Draft
20 Reserved
21 Double Underline Mode
22 Cancel Bold Mode
23 Reserved
24 Cancel Underline Mode (Single & Double)
25 Cancel Expanded Mode
26 Cancel Proportional Mode
Subscript and Superscript modes are enabled through the System Menu (ANSI OPTIONS-S/SCRIPT YES).
Refer to the Administrators Manual.