Printronix S828 - Page 13

ProgrammerManual PTX‐S828
Contents 11 260071‐001A
Command Description Page
ESC [ p1; pn g Tab clear (TBC) (ANSI). 80
ESC [ p1; pn m Select graphics rendition (SGR) (ANSI). 74
ESC [ T Selects a Code page (IBM). 42
ESC [ u n Bar Codes selection. (IBM -Epson) 54
ESC [ v nm Sets Barcode parameters. (IBM -Epson) 54
ESC \ Sets the relative dot position. (EPSON) 19
ESC \ Prints characters from all characters table. (IBM) 42
ESC \ or ST String terminator (ANSI). 83
ESC ] Sets a reverse line feed. (IBM) 17
ESC ^ Prints a single character from the all characters table. (IBM) 43
ESC _ Sets or cancels overscore printing. (IBM) 35
ESC + Sets n/360-inch line spacing. (IBM) 11
ESC < Prints characters for one line from left to right. (EPSON) 31
ESC = Defines downloaded characters. (IBM) 45
ESC = Sets MSB to 0. (EPSON) 50
ESC > Sets MSB to 1. (EPSON) 51
ESC 0 Sets vertical spacing to 1/8 inch (IBM/EPSON). 20
ESC 1 Sets vertical spacing to 7/72 inch. (IBM) 20
ESC 2 Sets the vertical spacing to 1/6 inch. (EPSON) 20
ESC 2 Enables the vertical spacing set by ESC A. (IBM) 20
ESC 3 Sets vertical spacing to n/180 inch. (IBM , EPSON) 21
ESC 3 Sets vertical spacing to n/216 inch. (IBM XLIII, 2381 +) 21
ESC 4 Sets the current position as top of form (first printable line). (IBM) 21
ESC 4 Sets italics printing mode. (EPSON) 35
ESC 5 Sets an automatic line feed after a carriage return. (IBM) 17
ESC 5 Cancels italics printing. (EPSON) 35
ESC 6 Selects the Character Set 2 (IBM). 43
ESC 7 Selects the Character Set 1 (IBM). 43
ESC 7 Cancel Printable Code Area Expansion (EPSON) 34
ESC A Sets variable vertical spacing to n/60 inch. (IBM , EPSON) 21
ESC A Sets variable vertical spacing to n/72 inch. (IBM XLIII, 2381 +) 21
ESC a Sets Letter Quality justification printing. (EPSON) 35
ESC B Sets vertical tab stops (IBM/EPSON). 22
ESC b Sets vertical tab stops in one of the 8 Vertical Format Unit channels
Available (EPSON) 22
ESC B NUL Resets vertical tab stops (IBM/EPSON). 22
ESC b NUL Resets vertical tab stops in one of the 8 Vertical Format Unit channels
Available (EPSON) 23
ESC c Resets to initial state (RIS) (ANSI). 84
ESC C 0 n Sets form length to n inches (IBM/EPSON). 23
ESC C n Sets form length to n lines (IBM/EPSON). 23
ESC D Sets horizontal tab stops (IBM/EPSON). 23
ESC d Spaces forwards relative dot position. (IBM) 24
ESC D or IND Index (ANSI). 78
ESC e Spaces backward relative dot position. (IBM) 24
ESC E Sets emphasized printing (IBM/EPSON). 35
ESC E or NEL Next line (ANSI). 78
ESC F Cancels emphasized printing (IBM/EPSON). 36
ESC G Sets double strike printing (IBM/EPSON). 36
ESC g Sets 15 CPI. (EPSON) 28