Procom DVS-21 - Page 8

User Guide
DVS-21
02/2018 • V.1.0 • L. Wolle
8/131
© 2017 ProCom
®
Professional Communication & Service GmbH • Technical changes reserved.
Menu Online
see Online functions
Monitor
Recording message traffic.
Data transfer
Transfer and activate the configuration files.
DVS Update
Update the CPU-Firmware.
Time
Transfer local PC time to the CPU.
Simulation
By simulating, messages can be sent to modules, telegrams from modules can be
emulated, and flags can be switched.
Menu Edit
see System Configuration
System data
General data and preferences of the system.
Call stations
Manages the call stations of the system.
Module rack
Manages the hardware equipment of the system.
Programs
Manages the programming of the system.
Menu Tools
see Tools
Database editor
Direct access to the datasets (special skills required)
Offline monitor
external program for evaluation of recordings of telegrams.
Compare files
Byte by byte comparison of two program files
WAV Player
Playback of a WAV File from the /wav/ directory
Tone generator
external program for the generation of test tones.
Speech storage
Configuration dialog for testing and recording the DSS1 (Speech storage)module.
Documentation
Creates an overview of the entire programming of a system. Print out of a labeling sheet
at plug-in carrier width.
Plausibility
Inspection of the configuration for logical correctness. Inspection takes place only in the
case of classic intercom connections and AllCall (group) calls within a local system!
Dependencies
Dependencies and version numbers of programs.
Menu Settings
see Settings
Preferences
Change the language and preferences of the program.
RS232 Settings
Settings of the serial interface.
Menu Help
Help
This document...
Wiring
Pin assignment of the modules. (Displayed with the default image viewer)
Examples
Programming examples for typical use.
Info
Version and release information of the program.