Procom DVS-21 - 9.2 Alarm lead 2

User Guide
DVS-21
02/2018 • V.1.0 • L. Wolle
75/131
© 2017 ProCom
®
Professional Communication & Service GmbH • Technical changes reserved.
9.2 Alarm lead 2
Program to control the Module DSS1 in Operation mode Speech storage.
 Playback of recorded sounds.
 Upstream connection of a pre-announcement chime before public address or group calls.
Priority
Handling of priorities (see Section 9.1)
!!! Linked programs must have the same priority.
Alarm flag
[IO] Flag for linking to the PA Public address, AllCall programs or ZZ connection
via its Lead flag.
To preselect multiple records, multiple programs with an identical Alarm flag
can be created.
The Alarm flag operates bi-directionally and contains information regarding the
audio channel.
Call station function
 Preselection of chime or alarm tone before announcements
(see Examples 2-5)
 Alarm function with manual voice input
This function is only possible on ProCom stations.
Playback of alarm tones can be triggered. Voice input can be made in the running playback.
Playback can be stopped.
(see Example 1)
Address, Port
Address and port of the station
Line
Line (key) for preselection or to start playback
Preselection duration
An announcement with chime must be started within the specified time.
Otherwise the preselection that has been set is reset when the time expires.
PTT line
Line (key) to input voice in the playback while it is running.
Clear line
Line (key) to cancel the playback while it is running
Lighting when alarm is
active
Display of the active playback by illumination of the key
External contact
Triggering of playback by a Line.
Address, Port, Line
Address, port and line of a module, via which the playback is triggered.
Flag (OUT)
[OUT] The Flag is switched on, if the Line (External contact) is switched on.
Tone/Speech message
DSS1 Address, Port
Address and port of the module DSS1, that is used as the speech memory
Message number
Entry marker in the memory, from which the playback takes place.
The playback starts at the specified mark and ends at the end of the memory
area, by switching off or after a set time.
Depending on the extent and subdivision of the memory area, recordings of
approx. 1x 60sec to 8x 8sec are possible.