Imager Error Messages
ERROR MESSAGE CAUSE SOLUTION
"ERROR.BUILD_MISSING_IMAGER_CALIBRATION" IMAGER_CALIBRATION
IS NOT PRESENT IN
SOFTWARE.
PLEASE CONTACT YOUR SERVICE REPRESENTATIVE
TO GET IMAGER_CALBRATION ENABLED.
"ERROR.BUILD_MISSING_UV CALIBRATION" UV_CALIBRATION IS
NOT PRESENT IN
SOFTWARE.
PLEASE CONTACT YOUR SERVICE REPRESENTATIVE
TO GET CALIBRATION ENABLED.
"ERROR.IMAGER_AUTO_PROFILE_FAILED" BULB MAY BE BAD OR
NEEDS REPLACING.
CHECK BULB STATUS. IF BULB STATUS IS LESS THAN
50% OR OVER 1000 HOURS CONSIDER REPLACING
BULB. IF BULB STATUS DOES NOT MEET EITHER OF
THESE TWO CRITERIA CONTACT YOUR SERVICE
REPRESENTATIVE.
To Next Page
Loading...
