1.
2.
3.
Material Cartridge Error Messages
ERROR MESSAGE CAUSE SOLUTION
"ERROR.BUILD_MATERIAL_INCOMPATIBLE" BUILD MATERIAL IN PRINT DOES
NOT MATCH BUILD MATERIAL IN
CARTRIDGE.
VERIFY CARTRIDGE IS INSTALLED TO
MATCH THE BUILD MATERIAL IN THE
PRINT YOU DESIRE.
"ERROR.MATERIAL_CARTRIDGE_EMPTY" EMPTY CARTRIDGE MATERIAL CARTRIDGE IS EMPTY. A NEW
MATERIAL CARTRIDGE WILL BE NEEDED
TO CONTINUE PRINTING.
ERROR.MATERIAL_CARTRIDGE_EXPIRED" THE EXPIRATION DATE SHOWS THE
MATERIAL CARTRIDGE TO BE
EXPIRED.
A NEW MATERIAL CARTRIDGE WILL BE
NEEDED TO CONTINUE PRINTING.
"ERROR.MATERIAL_CARTRIDGE_NOT_FOUND" CARTRIDGE MAY NOT BE FULLY
SEATED IN BRIDGE.THE MATERIAL
CARTRIDGE IS NOT FOUND IN THE
PRINTER.
CHECK TO INSURE THE MATERIAL
CARTRIDGE HAS BEEN INSERTED.
IF THE PRINTER IS NOT SEEING
THE MATERIAL CARTRIDGE, OPEN
THE SIDE DOOR AND REINSERT
THE MATERIAL CARTRIDGE.
IF THE PRINTER STILL DOES NOT
SEE THE MATERIAL CARTRIDGE, IT
MAY BE NECESSARY TO REBOOT
THE PRINTER.
"ERROR.MATERIAL_CARTRIDGE_NOTMATCH" THE PRINT MATERIAL AT THE TOP
OF THE QUEUE AND THE
CARTRIDGE MATERIAL IN THE
PRINTER DO NOT MATCH.
VERIFY THE PRINT MATERIAL REQUIRED
FOR THE DESIRED PRINT, AND INSTALL
THE SAME MATERIAL CARTRIDGE AND
MATERIAL TRAY.
To Next Page
Loading...
