Client's Computer & Network Interface
The internal controller in this printer provides an integrated, 10/100 - megabit-per-second (Mbps) Ethernet network connection. This connection
supports both the 10 base-T and 100 base-TX Ethernet standards. The controller's connector is designed for attaching the Ethernet cable.
When a facility's internal network is not 10base-T or 100base-TX, a media converter, such as a Coax to 10base-T will be required. Consult with
the organization's network engineering or the IT Department to provide assistance with these requirements.
Network Specifications Minimum Recommendations
Hardware Interface
Ethernet network
Printer Control Software
Proprietary
Client Hardware Requirements
2.8 GHZ Pentium 4 or better, min. 1GB of RAM
Client Software System
Internet Explorer 8 and above, Firefox 6 and above, Chrome 10 and above
Input Data File Format
. STL, . CTL.
To Next Page
Loading...
