To Next PageTo Next PageWhat to do if the red LED is lit and the 'Level' symbol is flashing on my ProMinent Water Pump?
If the red LED is lit and the 'Level' symbol is flashing on the LCD, along with 'Error' and 'Stop' symbols, it means the fluid level in the storage tank has reached 'liquid level low 2nd stage'. To resolve this, simply fill the storage tank.
Why is the yellow LED lit and the 'Level' symbol flashing on my ProMinent delta DLTa optoDrive?
If the yellow LED is lit and the 'Level' symbol is flashing on the LCD of your ProMinent Water Pump, it indicates that the fluid level in the storage tank has reached 'liquid level low 1st stage'. You should fill the storage tank.
Why is the 'Air lock' symbol flashing on my ProMinent delta DLTa optoDrive Water Pump?
If the yellow LED is lit and the 'Air lock' symbol is flashing on the LCD of your ProMinent Water Pump, or if the red LED is also lit with 'Error' and 'Stop' symbols, it is likely due to gas bubbles in the liquid end, possibly from leaks, a gaseous medium, or cavitation. If the red LED is lit, press [P], considering the process consequences. Bleed the liquid end and rectify the cause by sealing the system or slowing the suction stroke.
General| Brand | ProMinent |
|---|---|
| Model | delta DLTa optoDrive |
| Category | Water Pump |
| Language | English |
Warns about electric shock from mains voltage, fire hazards with flammable media, and handling dangerous chemicals.
Advises on preventing chemical spraying and dangers from rupturing hydraulic components.
Details control elements, key functions, and electrical connections on the pump.
Explains key functions, stroke length adjustment, and LCD display identifiers.
Details operating modes (Manual, Batch, Contact, Analog) and key functions (Calibration, Auxiliary rate, Flow).
Provides warnings on electric shock, incorrect operation, and capacity issues during assembly.
Covers warnings about chemical spraying, component rupture, and using approved parts.
Warns about electric shock risks from mains voltage, moisture, and improper installation.
Details pump sockets, pin assignments, and the function of the 'External control' terminal.
Covers 'Diaphragm rupture sensor' terminal and 'Fault indicating relay' output.
Explains selecting operating modes ('Mode' menu) and configuring settings ('Settings' menu).
Details settings for 'Manual' mode and the 'BATCH' menu within 'Batch' mode, including batch size adjustment.
Explains 'Contact' mode settings, pulse conversion, and the 'Memory' function extension.
Details 'Analog' mode settings, control via current signals, and signal processing types (0-20mA, 4-20mA, Curve).
Explains 'Curve' processing, its options (Linear, sidebands), and error processing for analog signals.
Explains setting concentration values in 'Manual' mode, including calibration and input steps.
Warns about high concentrations and outlines the procedure for setting up concentration measurement.
Details concentration input settings for 'Batch' mode, including prerequisites and procedure.
Continues explanation of Batch mode concentration settings, including safety and procedure.
Explains concentration input for 'Contact' mode, including safety and procedure.
Details concentration input settings for 'Analog' mode.
Warns about high concentrations and incorrect concentrations, outlining preparatory settings for Analog mode.
Explains how to set and activate an auxiliary stroke rate via the 'AUX' menu and 'External control' terminal.
Describes settings within the 'Metering' function, covering discharge and suction stroke adjustments.
Explains configuring pump relays using the 'Relay' function for various alerts and pump strokes.
Details configuring the pump's current output signal to represent strokes/h, capacity, or performance.
Outlines the 'System' menu structure and submenus for Unit, Diaphragm, Info, and Change head.
Lists programmable functions available in the 'Settings' menu across all operating modes.
Explains operating the pump in calibrated state for accurate volume/capacity display.
Details the 'Bleeding' function for controlled liquid end bleeding, its hardware options, and triggering methods.
Provides general operation safety warnings and details for manual mode, including stroke length adjustment and pump start/stop.
Warns about electric shock, fire hazards, chemical contact, and spraying during repairs.
Details the procedure for replacing the pump diaphragm, including safety precautions and exploded view references.
Lists faults without alerts, their causes, remedies, and responsible personnel.
Details fault alerts (e.g., low level, analog signal issues) and warning alerts (e.g., flow issues, diaphragm break).
Provides detailed performance data for various liquid end types, including pump capacity and stroke rates.
