The following list shows the order:
1. - Priming
2. - Stop
3. - Error, Pause
4. - Auxiliary dosing rate / Auxiliary frequency
5. - Manual, Analog, Contact, Batch, Fieldbus
Comments:
re 1. - "Priming" can take place in any pump mode (providing it is
working).
re 2. - "Stop" stops everything apart from "Priming".
re 3. - "Error", and "Pause" stop everything apart from "Priming".
re 4. - "Auxiliary dosing rate" and/or "Auxiliary frequency" always
have priority over the dosing rate / stroke rate specified by
an operating mode listed under 5 or the fieldbus.
Functional description
28
To Next Page
Loading...
Need help?
General
