4 Storage, Transport and Unpacking
WARNING!
Only return metering pumps for repair in a cleaned
state and with a flushed liquid end - refer to
"Decommissioning!
Only return metering pumps with a completed
Decontamination Declaration form. The Decon‐
tamination Declaration constitutes an integral part
of an inspection / repair order. A unit can only be
inspected or repaired when a Declaration of
Decontamination Form is submitted that has been
completed correctly and in full by an authorised
and qualified person on behalf of the pump oper‐
ator.
The "Decontamination Declaration Form" can be
found on our homepage.
CAUTION!
Danger of material damage
The device can be damaged by incorrect or
improper storage or transportation!
– The unit should only be stored or transported in
a well packaged state - preferably in its original
packaging.
–
The packaged unit should also only be stored
or transported in accordance with the stipu‐
lated storage conditions.
– The packaged unit should be protected from
moisture and the ingress of chemicals.
Ambient conditions - refer to "Technical Data" chapter.
Compare the delivery note with the scope of delivery:
n Metering pump with mains cable
n Connector kit for hose/pipe connection (optional)
n Product-specific operating instructions with EC Declaration of
Conformity
n Optional accessories
Safety Information
Ambient conditions
Scope of delivery
Storage, Transport and Unpacking
16
To Next Page
Loading...
Need help?
General
