11.3.2.4 Change program lines (
‘Change’
)
‘Menu / Information
è
Timer
è
Set timer
è
Change’
1. Use the
[Clickwheel]
to select the required program line /
instruction according to its number and press the
[Clickwheel]
.
2. Click through the instruction and change it.
ð
The timer software sorts a changed program line /
instruction after completion with the
[Clickwheel]
possibly
differently in between the other program lines (Rules -
see
Ä ‘Sorting sequence’ on page 86
).
11.3.2.5 Clear individual program lines (
‘Clear’
)
‘Menu / Information
è
Timer
è
Set timer
è
Clear’
1. Use the
[Clickwheel]
to select the required program line /
instruction according to its number.
2. The program line will be cleared as soon as you press the
[Clickwheel]
.
ð
The timer software re-sorts the remaining programme
lines (Rules - see
Ä ‘Sorting sequence’ on page 86
).
Clear all program lines
The option to clear all program lines is to be found
one level higher in the menu:
‘Menu / Information
è
Timer
è
Clear all’
11.3.3 Clear all
‘Menu / Information
è
Timer
è
Clear all
è
...’
Use the
‘Clear all’
menu to clear all instructions (the entire pro‐
gram).
11.3.4 Examples
Requirements:
n You have already worked with the pump type
n The time has been set (possibly set under
‘Settings
è
Set time
è
Time’
. Only possible with
‘Timer state’
-
‘Inactive’
).
Set up /
‘Menu’
87
To Next Page
Loading...
Need help?
General
