ProMinent gamma XL User Manual

6.
To complete the setting: press
[] Menu.
Alternatively: wait 60 seconds or exit the
‘Menu’ via the
[Menu] key or using ‘End’ .
Briefly press the
[Clickwheel] .
ð
The software switches to the next menu point or back to
the menu and saves the entry.
Press
[Back] .
ð
The software switches to the next menu point or back to
the menu without saving anything.
Press
[Menu] .
ð
The software cancels the entry and switches to a contin‐
uous display without saving anything.
B0777
5432
5
432
4
32
5
5432
2
543
a)
b)
c)
Fig. 32: a) Changing from one figure to its initial figures; b) Changing the figure; c) Returning from the last
figure to the (complete) figure (to correct a wrong figure, for example).
Changing a (complete) number
Turn the
[Clickwheel] .
ð
The value of the figure highlighted is raised or lowered.
Changing figures
1.
To adjust the value of a figure digit-by-digit, press
[Priming] .
ð
The first figure is highlighted - see Figure above, point a)
2. To adjust the value of a figure, turn the [Clickwheel] .
3.
To move to the next figure, press
[Priming] - see above
Figure, point b).
Confirming an entry
Exiting a menu option without con‐
firming it
Returning to a continuous display
Changing adjustable variables
Basic set-up principles
47

ProMinent gamma XL Specifications

General

Brand	ProMinent
Model	gamma XL
Category	Water Pump
Language	English