PLX3x Series ♦ Multi-Protocol Gateways Diagnostics and Troubleshooting
User Manual
ProSoft Technology, Inc. Page 35 of 215
January 25, 2018
2 From the toolbar, click the SETUP CONNECTION button.
3 In the Connection Setup dialog box, select ETHERNET from the SELECT
CONNECTION TYPE list.
4 Type in the gateway’s IP address in the ETHERNET field.
5 Click CONNECT.
6 Verify that the Ethernet is connected properly between your computer’s
communication port and the gateway.
7 If you are still not able to establish a connection, contact ProSoft Technology
Technical Support for assistance.
To Next Page
Loading...
