EIP Protocol PLX3x Series ♦ Multi-Protocol Gateways
User Manual
Page 74 of 215 ProSoft Technology, Inc.
January 25, 2018
Wait ACK (1775-KA buffer full)
Error code in the EXT STS byte (nn contains EXT error code)
EXT STS Error Codes
A field has an illegal value
Fewer levels specified in address than minimum for any address
More levels specified in address than system supports
Symbol is of improper format
Address does not point to something usable
Data or file is too large
Transaction size plus word address is too large
Access denied, improper privilege
Condition cannot be generated - resource is not available
Condition already exists - resource is already available
Command cannot be executed
Invalid parameter or invalid data
Address reference exists to deleted area
Command execution failure for unknown reason
Scanner not able to communicate with 1771 rack adapter
1171 Gateway response was not valid
File is open; another node owns it
Another node is the program owner
Data table element protection violation
Temporary internal problem
To Next Page
Loading...
Need help?
General
