ProSoft MVI56-PDPMV1 - Supported PROFIBUS Services

Reference MVI56-PDPMV1 ♦ ControlLogix Platform
User Manual PROFIBUS DPV1 Master
Page 208 of 251 ProSoft Technology, Inc.
5.2.7 Supported PROFIBUS Services
The following table lists all available services according to the PROFIBUS
specification.
Service
PROFIBUS
Version
Master Class 1
Master Class 2
Request
Response
Request
Response
DDLM_Data-Exchange
DP-V0
Yes
No
DDLM_Set_Prm
DP-V0
Yes
No
DDLM_Chk_cfg
DP-V0
Yes
No
DDLM Slave Diag
DP-V0
Yes
No
DDLM_Global_Control
DP-V0
Yes
No
DDLM_Get_Cfg
DP-V0
Yes
DDLM_Set_Slave_Add
DP-V0
Yes
DDLM_Read_Input
DP-V0
No
DDLM_Read_Output
DP-V0
No
DDLM_Get_Master_Diag
DP-V0
Yes
DDLM_Start_Seq
DP-V0
No
No
DDLM_Download
DP-V0
No
No
DDLM_Upload
DP-V0
No
No
DDLM_End_Seq
DP-V0
No
No
DDLM_Act_Param_Brct
DP-V0
No
No
DDLM_Act_Param
DP-V0
No
No
MSAC1_Read
DP-V1
Yes
MSAC1_Write
DP-V1
Yes
MSAL1_Alarm
DP-V1
Yes
MSAL1_Alarm_Ack
DP-V1
Yes
MSAC2_Initiate
DP-V1
No
MSAC2_Read
DP-V1
No
MSAC2_Write
DP-V1
No
MSAC2_DataTransport
DP-V1
No
MSAC2_Abort
DP-V1
No
Data_eXchange_Broadcast
DP-V2
No
Isochrone_mode (Takt sync)
DP-V2
No
Extended_Set_Prm (Subscriber)
DP-V2
No