7 ā Zoning Configuration
Managing Zone Sets
59183-03 A 7-15
A
Delete a Zone Set
Enter the Zoneset Delete command to delete a zone set as shown in the following
example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zoneset delete zoneset_1
SANbox (admin-zoning) #>zoning save
Rename a Zone Set
Enter the Zoneset Rename command to rename a zone set as shown in the
following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zoneset rename zoneset_old zoneset_new
SANbox (admin-zoning) #>zoning save
Copy a Zone Set
Enter the Zoneset Copy command to copy a zone set and its contents to a new
zone set as shown in the following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zoneset copy zoneset_1 zoneset_2
SANbox (admin-zoning) #>zoning save
Add Zones to a Zone Set
Enter the Zoneset Add command to add a zone to a zone set as shown in the
following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zoneset add zoneset_1 zone_1 zone_2
SANbox (admin-zoning) #>zoning save
To Next Page
Loading...
