14 ā Command Reference
Show Steering
14-178 59183-03 A
S
Show Steering
Displays the routes that data takes in the fabric.
Authority None
Syntax show steering [domain_id]
Keywords [domain_id]
The domain ID for which to display route information. If you omit [domain_id], the
system displays routes for all switches in the fabric.
Examples The following is an example of the Show Steering command:
SANbox #> show steering 35
DomainID DefaultOutPort InPort OutPort
-------- -------------- ------ -------
35 18 3 16/18/16/18
5 18/16/18/16
6 16/18/16/18
7 16/18/16/18
15 18/16/18/16
To Next Page
Loading...
