4 – Network Configuration
Managing IP Security
4-16 59183-03 A
S
Deleting an Association
To delete a user-defined association, enter the Ipsec Association Delete
command as shown in the following example:
SANbox #> admin start
SANbox (admin) #> ipsec edit
SANbox (admin-ipsec) #> ipsec association delete association_1
The security association will be deleted. Please confirm (y/n): [n] y
SANbox (admin-ipsec) #> ipsec save
The IPsec configuration will be saved and activated.
Please confirm (y/n): [n] y
To Next Page
Loading...
Need help?
General
