14 – Command Reference
Show Setup Radius
14-172 59183-03 A
S
Show Setup Radius
Displays RADIUS server information.
Authority None
Syntax show setup radius
common
server [server_number]
Keywords common
Displays the configuration parameters that are common for all RADIUS servers.
To display common and server-specific information, omit the keyword. Refer to
Table 14-26 for a description of the common configuration parameters.
server [server_number]
Displays the configuration parameters for the RADIUS server given by
[server_number]. [server_number] is an integer corresponding to a configured
server. To display common and server-specific information, omit the keyword.
Refer to Table 14-27 for a description of the server-specific configuration
parameters.
Examples The following is an example of the Show Setup Radius Common command:
SANbox #> show setup radius common
Radius Information
------------------
DeviceAuthOrder Local
UserAuthOrder Local
TotalServers 2
The following is an example of the Show Setup Radius Server command:
SANbox #> show setup radius server 2
Radius Information
------------------
Server: 2
ServerIPAddress bacd:1234:bacd:1234:bacd:1234:bacd:1234
ServerUDPPort 1812
DeviceAuthServer True
UserAuthServer True
AccountingServer True
Timeout 2
Retries 0
SignPackets False
Secret ********
To Next Page
Loading...
Need help?
General
