Qlogic SANbox 5600 Series Interface Manual

14 – Command Reference
Show Config Zoning
59183-03 A 14-143
A
Show Config Zoning
Displays zoning configuration parameters for the switch.
Authority None
Syntax show config zoning
Examples The following is an example of the Show Config Zoning command:
SANbox #> show config zoning
Configuration Name: default
-------------------
Zoning Configuration Information
--------------------------------
MergeAutoSave True
DefaultZone Allow
DiscardInactive False

Qlogic SANbox 5600 Series Specifications

General

Brand	Qlogic
Model	SANbox 5600 Series
Category	Switch
Language	English