Qlogic SANbox 5600 Series

14 – Command Reference
Show Config Security
59183-03 A 14-139
A
Show Config Security
Displays the security database configuration parameters.
Authority None
Syntax show config security
Examples The following is an example of the Show Config Security command:
SANbox #> show config security
Configuration Name: default
-------------------
Switch Security Configuration Information
-----------------------------------------
FabricBindingEnabled False
AutoSave True
Port Binding Status WWN
---- -------------- ---
0 True 10:20:30:40:50:60:70:80
1 True 10:20:30:40:50:60:70:80
2 False No port binding entries found.
3 True 10:20:30:40:50:60:70:80
4 True 10:20:30:40:50:60:70:80
5 False No port binding entries found.
6 True 10:20:30:40:50:60:70:81
7 False No port binding entries found.
8 True 10:20:30:40:50:60:70:80
9 False No port binding entries found.
10 False No port binding entries found.
11 False No port binding entries found.
12 False No port binding entries found.
13 False No port binding entries found.
14 False No port binding entries found.
15 False No port binding entries found.
16 False No port binding entries found.
17 False No port binding entries found.
18 False No port binding entries found.
19 False No port binding entries found.