14 – Command Reference
Show Testlog
14-182 59183-03 A
S
Show Testlog
Displays the contents of the diagnostic field test log file.
Authority None
Syntax show testlog
or
show test log
Examples The following is an example of the Show Testlog command:
SANbox #> show testlog
Queue: UID
Sequence Count: 676
Success Count: 420
Failed Count: 2023
Records: 127
Record: 1 of 127
Time: day mon dd hh:mm:ss yyyy
Sequence Number: 211
Test: TEST_SUITE_BLADE_OFFLINE (0x12)
Subtest: TEST_FLOW_TC (0x97)
Fault Code: DIAGS_ERR_DATA_VERIFY (0x1e)
Loops: 1
Blade/Asic/Port: 0/0/0
Record: 2 of 127
Time: day mon dd hh:mm:ss yyyy
Sequence Number: 211
Test: TEST_SUITE_BLADE_OFFLINE (0x12)
Subtest: TEST_FLOW_TC (0x97)
Fault Code: DIAGS_ERR_DATA_VERIFY (0x1e)
Loops: 1
Blade/Asic/Port: 0/0/0
.
.
.
To Next Page
Loading...
Need help?
General
