7 ā Zoning Configuration
Managing Zones
7-16 59183-03 A
S
Remove Zones from a Zone Set
Enter the Zoneset Remove command to remove zones from a zone set as shown
in the following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zoneset remove zoneset_1 zone_1 zone_2
SANbox (admin-zoning) #>zoning save
Activate a Zone Set
Enter the Zoneset Activate command to apply zoning to the fabric as shown in the
following example:
SANbox #> admin start
SANbox (admin) #> zoneset activate zoneset_1
Deactivate a Zone Set
Enter the Zoneset Deactivate command to deactivate the active zone set and
disable zoning in the fabric:
SANbox #> admin start
SANbox (admin) #> zoneset deactivate
Managing Zones
Managing Zones consists of the following tasks:
ī Create a Zone
ī Delete a Zone
ī Rename a Zone
ī Copy a Zone
ī Add Members to a Zone
ī Remove Members from a Zone
All of these tasks require an Admin session and a Zoning Edit session.
To Next Page
Loading...
