7 – Zoning Configuration
Managing Zones
7-18 59183-03 A
S
Add Members to a Zone
Enter the Zone Add command to add ports/devices to zone_1 as shown in the
following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zone add zone_1 alias_1 1,4 1,5
SANbox (admin-zoning) #> zoning save
Remove Members from a Zone
Enter the Zone Remove command to remove ports/devices from zone_1 as
shown in the following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zone remove zone_1 alias_1 1,4 1,5
SANbox (admin-zoning) #> zoning save
To Next Page
Loading...
Need help?
General
