14 ā Command Reference
Set Pagebreak
14-104 59183-03 A
S
Set Pagebreak
Specifies how much information is displayed on the screen at a time. This
command is useful for disabling pagebreaks to allow command scripts to run
without interruption.
Authority None
Syntax pagebreak [state]
Keywords [state]
[state] can be one of the following:
on
Limits the display of information to 20 lines at a time. The page break
function affects the following commands:
ī Alias (List, Members)
ī Show (Alarm, Log, Test Log)
ī Zone (List, Members)
ī Zoneset (List, Zones)
ī Zoning (Active, List)
off
Allows continuous display of information without a break. This is the default.
To Next Page
Loading...
