Qlogic SANbox 5600 Series Interface Manual

14 – Command Reference
Zoning Configured
59183-03 A 14-211
A
Zoning Configured
Displays the contents of the non-volatile zoning database.
Authority None
Syntax zoning configured
Examples The following is an example of the Zoning Configured command:
SANbox #> zoning configured
Configured (saved in NVRAM) Zoning Information
ZoneSet Zone ZoneMember
------- ---- ----------
wwn
wwn_b0241f
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
wwn_23bd31
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:23:bd:31
wwn_221416
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:14:16
wwn_2215c3
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:15:16

Qlogic SANbox 5600 Series Specifications

General

Brand	Qlogic
Model	SANbox 5600 Series
Category	Switch
Language	English