14 ā Command Reference
Show Postlog
59183-03 A 14-169
A
Show Postlog
Displays the Power On Self Test (POST) log, which contains results from the most
recently failed POST.
Authority None
Syntax show postlog
or
show port log
Examples The following is an example of the Show Postlog command:
SANbox #> show postlog
Queue: POST
Sequence Count: 467
Success Count: 452
Failed Count: 42
Records: 53
Record: 1 of 53
Time: day mmm dd hh:mm:ss yyyy
Sequence Number: 5
Consecutive Passes: 5
Record: 2 of 53
Time: day mmm dd hh:mm:ss yyyy
Sequence Number: 6
Test: TEST_SUITE_POST (0x13)
Subtest: TEST_STATIC_PORTADDR (0x72)
Fault Code: DIAGS_ERR_CPORT_VERIFY (0x34)
Loops: 0
Blade/Asic: 0/0
Register Address: 0x00000005
Received Data: 0x0082202b
Expected Data: 0x00a2202b
.
.
.
To Next Page
Loading...
