14 ā Command Reference
Image
59183-03 A 14-41
A
Image
Manages and installs switch firmware.
Authority Admin session
Syntax image
cleanup
fetch [account_name] [ip_address] [file_source] [file_destination]
install
list
tftp [ip_address] [file_source] [file_destination]
unpack [file]
Keywords cleanup
Removes all firmware image files from the switch. All firmware image files are
removed automatically each time the switch is reset.
fetch [account_name] [ip_address] [file_source] [file_destination]
Retrieves image file given by [file_source] using FTP and stores it on the switch
with the file name given by [file_destination]. The image file is retrieved from the
host IP address given by [ip_address]. [ip_address] can be an IP address (version
4 or 6) or a DNS host name. If an account name needs a password to access the
FTP server, the system will prompt you for it.
install
Downloads firmware from a remote host to the switch, installs the firmware, then
resets the switch to activate the firmware. This is disruptive. The command
prompts you for the following:
ī File transfer protocol (FTP or TFTP)
ī IP address or DNS host name of the remote host
ī An account name and password on the remote host (FTP only)
ī Pathname for the firmware image file
list
Displays the list of image files that reside on the switch.
tftp [ip_address] [file_source] [file_destination]
Retrieves image file given by [file_source] using TFTP and stores it on the switch
with the file name given by [file_destination]. The image file is retrieved from the
host IP address given by [ip_address]. [ip_address] can be an IP address (version
4 or 6) or a DNS host name.
To Next Page
Loading...
