Qlogic SANbox 5600 Series

14 – Command Reference
Show Setup Services
59183-03 A 14-173
A
Show Setup Services
Displays switch service status information.
Authority None
Syntax show setup services
Examples The following is an example of the Show Setup Services command:
SANbox #> show setup services
System Services
-----------------------------
TelnetEnabled True
SSHEnabled False
GUIMgmtEnabled True
SSLEnabled False
EmbeddedGUIEnabled True
SNMPEnabled True
NTPEnabled True
CIMEnabled True
FTPEnabled True
MgmtServerEnabled True
CallHomeEnabled True