Qlogic SANbox 5600 Series Interface Manual

14 – Command Reference
Show Pagebreak
14-160 59183-03 A
S
Show Pagebreak
Displays the current pagebreak setting.
Authority None
Syntax show pagebreak
Notes The pagebreak setting limits the display of information to 20 lines (On) or allows
the continuous display of information without a break (Off).
Examples The following is an example of the Show Pagebreak command:
SANbox #> show pagebreak
current setting: ON

Qlogic SANbox 5600 Series Specifications

General

Brand	Qlogic
Model	SANbox 5600 Series
Category	Switch
Language	English