59183-03 A 4-1
4 Network Configuration
Network configuration consists of the IP parameters that identify the switch in the
network and provide for IP security. This section describes the following network
configuration tasks:
ī Displaying the Network Configuration
ī Configuring the Ethernet Port
ī Verifying a Switch in the Network
ī Managing IP Security
Displaying the Network Configuration
The Show Fabric command displays IP addresses for all switches in the fabric as
shown in the following example.
SANbox #> show fabric
Domain *133(0x85)
WWN 10:00:00:c0:dd:0d:53:91
SymbolicName SANbox
HostName <undefined>
EthIPv4Address 10.20.116.133
EthIPv6Address <undefined>
* indicates principal switch
To Next Page
Loading...
