5 – Switch Configuration
Displaying Switch Information
5-6 59183-03 A
S
Switch Configuration Parameters
Enter the Show Config Switch command to display the switch configuration
parameters. These parameters determine the operational characteristics of the
switch. Refer to Table 14-22 for a description these parameters.
SANbox #> show config switch
Configuration Name: default
-------------------
Switch Configuration Information
--------------------------------
AdminState Online
BroadcastEnabled False
InbandEnabled True
FDMIEnabled False
FDMIEntries 10
DefaultDomainID 19 (0x13)
DomainIDLock True
SymbolicName sw108
R_A_TOV 10000
E_D_TOV 2000
PrincipalPriority 254
ConfigDescription Default Config
ConfigLastSavedBy admin@OB-session5
ConfigLastSavedOn day month date time year
InteropMode Standard
Zoning Configuration Parameters
Enter the Show Config Zoning command to display zoning configuration
parameters. These parameters determine how zoning is applied to the switch.
Refer to Table 14-24 for a description of these parameters.
SANbox #> show config zoning
Configuration Name: default
-------------------
Zoning Configuration Information
--------------------------------
MergeAutoSave True
DefaultZone Allow
DiscardInactive False
To Next Page
Loading...
Need help?
General
