14 – Command Reference
Show Config Port
59183-03 A 14-137
A
Show Config Port
Displays configuration parameters for one or more ports.
Authority None
Syntax show config port [port_number]
Keywords [port_number]
The number of the port. Ports are numbered beginning with 0. If you omit
[port_number], all ports are specified.
Examples The following is an example of the Show Config Port command for port 3:
SANbox #> show config port 3
Configuration Name: default
-----------------------------
Port Number: 3
------------
AdminState Offline
LinkSpeed Auto
PortType GL
SymbolicName Port3
ALFairness False
DeviceScanEnabled True
ForceOfflineRSCN False
ARB_FF False
InteropCredit 0
ExtCredit 0
FANEnabled True
AutoPerfTuning False
LCFEnabled False
MFSEnabled True
VIEnabled False
MSEnabled True
NoClose False
IOStreamGuard Disabled
PDISCPingEnable True
To Next Page
Loading...
Need help?
General
