Qlogic SANbox 5600 Series

14 – Command Reference
Show Config Port
14-138 59183-03 A
S
The following is an example of the Show Config Port command for an XPAK port:
SANbox #> show config port 16
Configuration Name: default
-------------------
Port Number: 16
------------
AdminState Online
LinkSpeed 10Gb/s
PortType G
SymbolicName 10G-16
DeviceScanEnabled True
ForceOfflineRSCN False
AutoPerfTuning False
LCFEnabled False
MFSEnabled False
MSEnabled True
IOStreamGuard Disabled
VIEnabled False
PDISCPingEnabled True