5 – Switch Configuration
Displaying Switch Information
59183-03 A 5-7
A
Security Configuration Parameters
Enter the Show Config Security command to display security configuration and
port binding parameters. These parameters determine how security is applied to
the switch. Refer to Table 14-20 for a description of the switch security
configuration parameters. Refer to Table 14-21 for a description of the port binding
parameters.
SANbox #> show config security
Configuration Name: default
-------------------
Switch Security Configuration Information
-----------------------------------------
FabricBindingEnabled False
AutoSave True
Port Binding Status WWN
---- -------------- ---
0 True 10:20:30:40:50:60:70:80
1 True 10:20:30:40:50:60:70:80
2 False No port binding entries found.
3 True 10:20:30:40:50:60:70:80
4 True 10:20:30:40:50:60:70:80
5 False No port binding entries found.
6 True 10:20:30:40:50:60:70:81
7 False No port binding entries found.
8 True 10:20:30:40:50:60:70:80
9 False No port binding entries found.
10 False No port binding entries found.
11 False No port binding entries found.
12 False No port binding entries found.
13 False No port binding entries found.
14 False No port binding entries found.
15 False No port binding entries found.
16 False No port binding entries found.
17 False No port binding entries found.
18 False No port binding entries found.
19 False No port binding entries found.
Hardware Information
Enter the Show Chassis command to display the status of the switch hardware
including fans, power supplies, internal temperature, and Heartbeat LED status.
To Next Page
Loading...
Need help?
General
