14 ā Command Reference
Capture
14-12 59183-03 A
S
The following is an example of the Capture Remove command:
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome) #> capture remove
Capture Entries for Profile: Tech_Support_Center
Index TimeOfDay DayOfWeek Interval
----- --------- --------- --------
1 02:00 Sat 1 (weeks)
Please select a capture entry from the list above ('q' to quit): 1
The selected capture entry has been removed from profile Tech_Support_Center.
This configuration must be saved with the 'callhome save' command
before it can take effect, or to discard this configuration
use the 'callhome cancel' command.
To Next Page
Loading...
