14 – Command Reference
Ipsec
59183-03 A 14-45
A
history
Displays a history of IP security modifications. This keyword does not require an
Admin session. History information includes the following:
îš„ Time of the most recent IP security database modification and the user who
performed it
îš„ Checksums for the active and inactive IP security databases
limits
Displays the maximum and current numbers of configured associations and
policies. This keyword does not require an Admin session nor an Ipsec Edit
session. However, in an Ipsec Edit session, this command displays the number of
both configured associations and policies, plus those created in the edit session
but not yet saved.
save
Saves changes made during the current Ipsec Edit session.
Examples The following is an example of the Ipsec History command:
SANbox #> ipsec history
IPsec Database History
----------------------
ConfigurationLastEditedBy johndoe@OB-session5
ConfigurationLastEditedOn Sat Mar 8 07:14:36 2008
Active Database Checksum 00000144
Inactive Database Checksum 00000385
The following is an example of the Ipsec Limits command:
SANbox #> ipsec limits
Configured (saved) IPsec Information
IPsec Attribute Maximum Current
--------------- ------- -------
MaxConfiguredSAs 512 0
MaxConfiguredSPs 128 0
To Next Page
Loading...
Need help?
General
