Qlogic SANbox 5600 Series

14 – Command Reference
Reset
14-74 59183-03 A
S
Table 14-13. Zoning Configuration Defaults
Parameter Default
MergeAutoSave True
DefaultZone Allow
DiscardInactive False
Table 14-14. SNMP Configuration Defaults
Parameter Default
SNMPEnabled True
Contact <syscontact undefined>
Location <sysLocation undefined>
Description SANbox 5600 Series FC Switch
ObjectID 1.3.6.1.4.1.1663.1.1.1.1.23 (SANbox 5600
1.3.6.1.4.1.1663.1.1.1.1.24 (SANbox 5602)
AuthFailureTrap False
ProxyEnabled True
SNMPv3Enabled False
Trap [1-5] Address Trap 1: 10.0.0.254; Traps 2–5: 0.0.0.0
Trap [1-5] Port 162
Trap [1-5] Severity Warning
Trap [1-5] Version 2
Trap [1-5] Enabled False